- Set Speed
- Coast/Reduce Speed
- Resume/
Accel
- Tap-Up,
1 MPH per tap
- Tap-Down, 1 MPH per tap
- Controlled Resume Rate
- Closer, More Accurate
Control of Set Speed
Enhanced
Adaptability
- Works with 3, 4, 5, 6 or 8 Cylinders
- Select
ECM, AC Generator, Magnets, or Pulse Sender as Speed Signal Source
- Select
Square or Sine Wave Speed Signal Source
- Quiet
Operation Allows more Mounting Locations
- Select
Acceleration Rate
- Select
Gain Control
- Select
Manual or Automatic Transmission
- Select Open
Circuit or Closed Circuit Engagement Switches
|
- Modular Design
- Removable Wiring Harness with Locking Device
- Redesigned Water Sealing
- Neutral Safety Switch (NSS) Compatible
- Cruise Engaged Output (Ground Signal When Engaged)
- Self Diagnostic
Easier
Installation
- No Vacuum Required
- Lost Motion built into the cable
- Smaller Module
- Single Unit Mounting
- New Connectors with Positive Contact and Lock
- No Clutch Switch Needed (except Diesel)
- In-Line Fuses are Closer to Module
- VSS (Vehicle Speed Sensor) Wire Already in Harness
- Additional Throttle Hardware Included in Kit
- Compatible with Neutral Safety
- Compatible with Distributorless Ignition Systems
- Compatible with Direct Fire Ignition Systems
|
